FPS - general FPS thread
how can i increase my fps without changing hardware?
post ur suggestions plz
p.s i always turn off all unnecessary programs so dont post this suggestion
and sorry if this thread is alredy posted then give at least a link
Edit by brendo333: Ok, I changed the thread name and made it sticky. From now on this will be the general FPS (suggestion/help) thread. Also, I'll search the older threads related to FPS for some useful stuff and paste it here.
Suggestions:
Windows settings
Ingame commands
Using FPS increase models for higher FPS
Some commands here,
http://www.fpsbanana.com/scripting/search?gsearch=fps
Originally posted by ExtractSome commands here,
http://www.fpsbanana.com/scripting/search?gsearch=fps
not much help but ty anyway...
Ofc it didn't help you, it just says how you can increase your FPS via typing in some simple commands in your userconfig.
developer 0
r_mmx 1
ex_interp 0.01
rate 25000
cl_updaterate 101
cl_cmdrate 101
max_smokepuffs 0
max_shells 0
Ingame Commands
Here are some commands for better FPS (yup, they're all legal).
I'll write some more things how to get a better FPS later.
developer 1
fps_max 101
cl_ejectbrass 0
cl_phys_props_enable 0
cl_phys_props_max 0
cl_muzzleflash_dlight_3rd 0
cl_muzzleflash_dlight_1st 0
cl_ragdoll_physics_enable 0
cl_ragdoll_fade_time 1
cl_show_splashes 0
cl_smooth 0
commentary 0
dsp_enhance_stereo 0
dsp_slow_cpu 1
mat_antialias 0
mat_bumpmap 0
mat_bloom 0
mat_bufferprimitives 1
mat_clipz 0
mat_fastspecular 1
mat_hdr_enabled 0
mat_mipmaptextures 0
r_cheapwaterstart 1
r_cheapwaterend 1
r_drawdetailprops 0
r_dynamic 0
r_lightinterp 0
r_rainsimulate 0
r_propsmaxdist 100
r_shadows 0
rope_smooth 0
fog_enable 0
fog_enable_water_fog 0
gl_clear 0
r_rainsimulate 0
Make a notepad file with these commands and name it (for example) fps and add "exec fps.cfg" line in your config.
Windows Settings
First of all if you have NVIDIA graphic card you should turn off the vertical sync (open the NVIDIA Control Panel, go to 3D settings and you'll find a tab named Global Settings. Below you'll see some settings. Find vertical sync and turn it off-Force off).
Also, keeping your PC clean with registry cleaner, anti-virus program and other maintenance programs is always a great thing.
Also, turn off every processes you don't need. The ones you need are:
-svchost
-explorer
-taskmgr
-services
-system
-setpoint
-powerstrip
Only if you have Logitech mouse!
Now some other things:
Right click on My Computer->Properties->Advanced->Settings (for Performance)->Adjust for best performance. In the same window (Performance options) you have tab named Advanced. Set Processor Scheduling for Background Services. Set Memory Usage for Programs. In the same window, under Memory Usage, you'll see Virtual Memory. Click the "Change" button. Set the "Custom Size" to 500 (initial size) to 1000(maximum size). But then you'll have to have at least 1GB free on the disk. If you don't have then delete some unneeded stuff from the partition.
Now do like this: Right click on My Computer->Properties->Hardware->Device Manager. Now you must find the IDE ATA/ATAPI controllers. Go to properties. Now you'll see tabs. Go to the Primary Channel and after to the Secondary Channel tab. DMA must be set.
OK, lets move on. Start->Run-> write services.msc
Now shut down everything you think you don't need. Some of them are Printer spooling, Automatic Updates, Themes... Description is provided so feel free to read it for other services before you decide to shut it down.
i have another question - which one of these modes should i use for best fps?
1.software
2.opengl
3.d3d
?
Originally posted by brendo333Ingame Commands
Here are some commands for better FPS (yup, they're all legal).
I'll write some more things how to get a better FPS later.
developer 1
fps_max 101
cl_ejectbrass 0
cl_phys_props_enable 0
cl_phys_props_max 0
cl_muzzleflash_dlight_3rd 0
cl_muzzleflash_dlight_1st 0
cl_ragdoll_physics_enable 0
cl_ragdoll_fade_time 1
cl_show_splashes 0
cl_smooth 0
commentary 0
dsp_enhance_stereo 0
dsp_slow_cpu 1
mat_antialias 0
mat_bumpmap 0
mat_bloom 0
mat_bufferprimitives 1
mat_clipz 0
mat_fastspecular 1
mat_hdr_enabled 0
mat_mipmaptextures 0
r_cheapwaterstart 1
r_cheapwaterend 1
r_drawdetailprops 0
r_dynamic 0
r_lightinterp 0
r_rainsimulate 0
r_propsmaxdist 100
r_shadows 0
rope_smooth 0
fog_enable 0
fog_enable_water_fog 0
gl_clear 0
r_rainsimulate 0
Make a notepad file with these commands and name it (for example) fps and add "exec fps.cfg" line in your config.
developer 1 isnt legal
28/01/2009 15:19use opengl
28/01/2009 15:19Originally posted by opapai have another question - which one of these modes should i use for best fps?
1.software
2.opengl
3.d3d
?
Why not test yourself :/
I think opengl works the best.
there are a bit more processes u need, lol. don't play with shit you dont know.
Originally posted by slaipOriginally posted by brendo333Ingame Commands
Here are some commands for better FPS (yup, they're all legal).
I'll write some more things how to get a better FPS later.
developer 1
fps_max 101
cl_ejectbrass 0
cl_phys_props_enable 0
cl_phys_props_max 0
cl_muzzleflash_dlight_3rd 0
cl_muzzleflash_dlight_1st 0
cl_ragdoll_physics_enable 0
cl_ragdoll_fade_time 1
cl_show_splashes 0
cl_smooth 0
commentary 0
dsp_enhance_stereo 0
dsp_slow_cpu 1
mat_antialias 0
mat_bumpmap 0
mat_bloom 0
mat_bufferprimitives 1
mat_clipz 0
mat_fastspecular 1
mat_hdr_enabled 0
mat_mipmaptextures 0
r_cheapwaterstart 1
r_cheapwaterend 1
r_drawdetailprops 0
r_dynamic 0
r_lightinterp 0
r_rainsimulate 0
r_propsmaxdist 100
r_shadows 0
rope_smooth 0
fog_enable 0
fog_enable_water_fog 0
gl_clear 0
r_rainsimulate 0
Make a notepad file with these commands and name it (for example) fps and add "exec fps.cfg" line in your config.
developer 1 isnt legal
depends on what ur playing
This is the easiest way to get the best fps and no need to fix any settings.
Some computers are not able to run more then 75, 80, 90, 100 hz etc etc. But to find out and get the best fps, you simply go to this page and download it --> http://www.pagehosting.co.uk/rl/
After you downloaded you only need to open it and press "On" to enable the program, after that you just open cs and play. To find out if youre fps did go more up you simply write on console "net_graph 3" to show fps.
Hope it helps
Ps: Allways run the program to get the highest fps again, if not, the fps is low again before you installed the program.
Unknown command: cl_ejectbrass
Unknown command: cl_phys_props_enable
Unknown command: cl_phys_props_max
Unknown command: cl_muzzleflash_dlight_3rd
Unknown command: cl_muzzleflash_dlight_1st
Unknown command: cl_ragdoll_physics_enable
Unknown command: cl_ragdoll_fade_time
Unknown command: cl_show_splashes
Unknown command: cl_smooth
Unknown command: commentary
Unknown command: dsp_enhance_stereo
Unknown command: dsp_slow_cpu
Unknown command: mat_antialias
Unknown command: mat_bumpmap
Unknown command: mat_bloom
Unknown command: mat_bufferprimitives
Unknown command: mat_clipz
Unknown command: mat_fastspecular
Unknown command: mat_hdr_enabled
Unknown command: mat_mipmaptextures
Unknown command: r_cheapwaterstart
Unknown command: r_cheapwaterend
Unknown command: r_drawdetailprops
Unknown command: r_lightinterp
Unknown command: r_rainsimulate
Unknown command: r_propsmaxdist
Unknown command: r_shadows
Unknown command: rope_smooth
Unknown command: fog_enable
Unknown command: fog_enable_water_fog
are you talking about cs 1.6? because those settings aren`t recognized...
Originally posted by opai have another question - which one of these modes should i use for best fps?
1.software
2.opengl
3.d3d
?
I found that D3D works great on maps like risk_compound/sector, bhopindustry. I've got ATi HD4000. But I think it doesnt work for every ATIi grafics. Could anyone with the ATi try it?
I've tryied play kz with a 4200 HD ati onboard... and the results are these...
87fps 5 ms 2494 wpoly 1103 epoly
89fps 5 ms 2494 wpoly 1103 epoly
89fps 80 ms 2494 wpoly 1103 epoly
12fps 6 ms 2494 wpoly 1103 epoly
85fps 80 ms 2494 wpoly 1103 epoly
12fps 6 ms 2494 wpoly 1103 epoly
85fps 5 ms 2494 wpoly 1103 epoly
90fps 5 ms 2494 wpoly 1103 epoly
86fps 5 ms 2494 wpoly 1103 epoly
86fps 5 ms 2494 wpoly 1103 epoly
89fps 5 ms 2494 wpoly 1103 epoly
86fps 6 ms 2494 wpoly 1103 epoly
87fps 5 ms 2494 wpoly 1103 epoly
88fps 5 ms 2494 wpoly 1103 epoly
88fps 5 ms 2494 wpoly 1103 epoly
89fps 81 ms 2494 wpoly 1103 epoly
12fps 6 ms 2494 wpoly 1103 epoly
84fps 80 ms 2494 wpoly 1103 epoly
12fps 6 ms 2494 wpoly 1103 epoly
79fps 5 ms 2494 wpoly 1103 epoly
88fps 6 ms 2494 wpoly 1103 epoly
85fps 5 ms 2494 wpoly 1103 epoly
87fps 5 ms 2494 wpoly 1103 epoly
87fps 5 ms 2494 wpoly 1103 epoly
87fps 5 ms 2494 wpoly 1103 epoly
88fps 5 ms 2494 wpoly 1103 epoly
88fps 5 ms 2494 wpoly 1103 epoly
88fps 5 ms 2494 wpoly 1103 epoly
These things happens in cg_damaged_city, kz_kzsca_bhopindustry... etc, but in others maps, i have 100 fps...
I have a Phenom II x4 955, 2 gb ram, windows 7, and the ati Radeon 4200 HD...
But, in d3d mode, i have 100 fps, in those maps, the problem imo is ati with opengl in cs...
hud_draw 0 helps a bit too
Please log in to post replies.