h.l.a.e. compaths

st1g rscpt all · 2009-10-11T04:29:00+00:00

hello guys, i have an annoying problem in hlae. \r\nfirst of all im makin the compaths ( first with FLAG 1 ), then when i try to see what is actually i made - the camera dont follow to the points of my compath place.\r\nim trying all this stuff with spec_autodirector 1 in console, but its does not fix it. when i click on one of the compath the timeline goes to the time where the compath is - but not camera.\r\n\r\nhelp

Started by st1g rscpt all

11/10/2009 04:29

Page 1 of 2

st1g rscpt all11/10/2009 04:29(edited 11/10/2009 04:31)

hello guys , i have an annoying problem in hlae.
first of all im makin the compaths ( first with FLAG 1 ) , then when i try to see what is actually i made - the camera dont follow to the points of my compath place.
im trying all this stuff with spec_autodirector 1 in console , but its does not fix it. when i click on one of the compath the timeline goes to the time where the compath is - but not camera.

help

geddyK11/10/2009 10:35(edited 12/10/2009 14:50)

hi,

I try to help you :P so do the first compath if you do, change 0 to 1 and this time you fly time... further moves to the next place where you go and add your compatch next compatch but not type "1" just as is and axes fly again until after this type of consol "spec_autodirector" and "spec_mode 3" and coming in the first place and then goto pressing rewind a little time back and press start...
I suggests you bind "key" dem_pause 1 and bind "key" dem_pause 0 and will then be easier :)

here you have best guide for doing compath's:
http://www.youtube.com/watch?v=2iNmC4c5zn4

I hope that helped you =)

st1g rscpt all12/10/2009 05:01(edited 12/10/2009 05:04)

it is still do not goes to the points...

ive reinstalled my cs , hlae , windows ... its not helped me

geddyK12/10/2009 14:50

Originally posted by st1g
ive reinstalled my cs , hlae , windows ... its not helped me

lol

qbig-.^12/10/2009 20:28

flag 1 on first campath after flag 0 on every other when you are finnish you will whrite spec_autodirector 1 and spec_mode 3 then goto your first campath and go some frames back then it will work i thinks

BAEVERN^12/10/2009 23:29

Originally posted by st1g
it is still do not goes to the points...

ive reinstalled my cs , hlae , windows ... its not helped me

haha wtf :D

http://www.youtube.com/watch?v=H4bOnXP46Gs Just follow that guide (by BOOM.dll)
Follow it exactely and it will work for u =)

boom.dll13/10/2009 10:37

i`d like to think my tutorial is that good... but i would probably say that Moxx`s tutorial about campaths is better ;)

geddyK left you a link.

st1g rscpt all14/10/2009 12:51

i asked for tutorials ? whats wrong with u ?

and btw , i have the stuff like this in my console

Interpolate time: 44.41, fraction 0.00, point : 1538.50,1611.75,61.50
Interpolate time: 44.41, fraction 0.00, point : 1538.50,1611.75,61.50
Interpolate time: 44.41, fraction 0.00, point : 1538.50,1611.75,61.50
Interpolate time: 44.41, fraction 0.00, point : 1538.50,1611.75,61.50

Lazze14/10/2009 14:27

You could try to write: spec_autodirector_internal 1

That might fix it.

rK15/10/2009 20:34

or just dont care about that. got that sometimes too but I never care

boom.dll16/10/2009 08:49

Originally posted by st1g
i asked for tutorials ? whats wrong with u ?

well if it aint working you are fucking up somewhere... right?

now go watch the fucking tutorials and do exactly what they do.
problem solved.........

st1g rscpt all17/10/2009 16:56

boom.dll

well..how could i fucked up smth if ive reinstalled all the stuff esp WINDOWS.

how about that?

ITS THE FUCKIN SAME SHIT THAT I HAD BEFORE

Lazze17/10/2009 17:21

Originally posted by st1g
boom.dll

well..how could i fucked up smth if ive reinstalled all the stuff esp WINDOWS.

how about that?

ITS THE FUCKIN SAME SHIT THAT I HAD BEFORE

What he is trying to tell u is that you maybe did not follow the tutorials u watched carefully enough...

maximaLz17/10/2009 20:37

These guys are trying to help you, if I were them, I would not even continuing to answer you, fucking kid.

boom.dll18/10/2009 11:09

how can something that worked before not work now?
esp if "ITS THE FUCKIN SAME SHIT YOU HAD BEFORE" ?
its because you did something wrong... somewhere... retrace your steps and try to find out where you fucked up.

and try to be more polite... were not being assholes... thats why we are still trying to help you...

k a f f e e18/10/2009 13:07

well i experienced spec_autodirector 1 is that kind of command you turn on and off, so 1st time u use it it will work, 2nd time it doesnt work, 3rd time it works again ect.

just type in the command untill the "goto" button works corretly on the first campath (it should not just come up with the time, you should also see the view)
if this works, dont type it in again, just use the demoplayer bar to go like 0.50 seconds before the campath and press start + exit the menu rly fast

if this doesnt work you propably didnt follow the tutorials exactly, there's nothing as "bugged" campath if you dont have a old HLAE version & reinstalling windows is even more sensefree

V0ncH...18/10/2009 16:03(edited 18/10/2009 16:04)

i know how to fix it, i had the same problem as u

after u done spec_autodirector 1, also do spec_autodirector_internal 1,

then go few frames back (like normal),
Then LISTEN carefully you HAVE to do this:
then u press ESC to close the console and shit, then press f3 (bind f3 "dem_pause 0"), then ure campaths will work 100% NO DOUBT, if u did the other parts right (moxx's tutorial etc.) trust me

st1g rscpt all18/10/2009 20:28

Thanks V0ncH , its working now!!!

V0ncH...19/10/2009 08:59

Originally posted by st1g
Thanks V0ncH , its working now!!!

hehe :D i told u =D

Fredibabz20/10/2009 14:56

you just didn't follow the tut carefully enough :).
if you had, you wouldn't have had this problem.

Page 1 of 2

Please log in to post replies.