watertank problem

Started by Mentalo
11/01/2008 17:44
Page 1 of 1
Mentalo11/01/2008 17:44

hey guys,
i wanted to make tank filled with water or sth but as you can see http://data.fuskbugg.se/skalman01/Unbenannt1.JPG
it doesnt appear, only the top is visible! What can i do? :(

colix mapper11/01/2008 19:55

maybe if u hollow the water .. dunno, just a tip :)

Mentalo11/01/2008 20:17(edited 11/01/2008 20:17)

didnt work :/ interesting is that on my last map these tanks worked :(

Distt11/01/2008 20:42

side of water doesnt show imo, try rotating the texture 90 degrees? (just a guess btw :P)

or just keep it func wall

Mentalo11/01/2008 21:08(edited 11/01/2008 21:16)

does it move when its a func_wall?

EDIT: func_wall didnt work and texture rotating neither :/

Pieshels mapper11/01/2008 22:36

I think you mustn't use !... texture... try what you can imaginate, 90% of time it's better to discover something yourself :D

Mentalo11/01/2008 23:03

... thx very helpful comment Pieshels ... i tried anything i can imagine why else would i ask in this forum then???

eiRa mapper12/01/2008 00:05

you probably have a hole somewhere in the tube and the water is leaking out...
or you could try changing the texture of the inside of the tube or make the water brush 1 unit smaller than the tube so its not touching the walls

Mentalo12/01/2008 00:08

ok ill try it thx so far

DaMp mapper12/01/2008 01:20

eira got it make the waterblock smaller than the glass around ...

Mentalo12/01/2008 12:46

i tried that but it didnt work i just see the top of the water :(

Dalai mapper27/02/2008 20:24

that's the water-texture... (!texturename) -> You can only see the faces that are abolutly paralel to the ground layer of the world...

raver mapper27/02/2008 22:33(edited 27/02/2008 22:35)

nevermind <--- EDITED

Page 1 of 1

Please log in to post replies.