Pro kz settings
08/03/2018 21:00(edited 09/03/2018 19:15)Hey, there've been a lot of asking on best kz settings. And since today I randomly decided to note down my settings into txt, because lately i feel very comfortable and confident with my game running and i fear it could get lost or resetted due bad luck which sometimes happens. Anyway since I'm doing it for myself I thought that I would share it for those interested. I think this should enhance your efficiency. If you have 100hz monitor then for you it might be perfect setup. If you have lower than 100 then idk, but you could try it as well, just change values to your monitor refresh rate setup (60/75 or whatever). I don't claim to be super pro or that these settings are best you can get but as I said earlier, it's really the best setup as for me.
windows sensitivity - center
windows accel - off
720 dpi
mouse logitech g402
m_rawinput 1
raw mouse input (in cs mouse settings) - ON
m_filter 0
sensitivity 2.7 - 2.9
cs launch options: -noforcemaccel -noforcemspd -noforcemparms -freq 100
monitor hz set to 100 (must be exactly 100 if your monitor provides that value)
IG resolution 1280x960
black bars on
All it comes down to is to make the game run smooth, which you can get by using 100hz refresh rate.
Also you might want to make sure your windows accel is turned off. For that better install MarkC mousefix and run RInput (as a one time run to see if the game turned different). Creating new thread so this post doesn't get lost easily. Cheers.
sv_cheats 1
jk
windows sensitivity - center
windows accel - off
800 dpi
mouse logitech g402
m_rawinput 0 (1 for win10)
raw mouse input (in cs mouse settings) - OFF (ON for win10)
m_filter 0
sensitivity 2.0
cs launch options: -noforcemparms -freq 75
monitor hz set to 75
game resolution: 1024x768 (with black stripes on the sides)
native resolution: 1920x1080
mouse: g400s + hardware unlocked scroll wheel.
dpi: 2400
sensetivity: 1
m_rawinput 1
launchoptions: -noforcemaccel -noforcemspd -noforcemparms -freq 100
resolution: 1024x768 @ Old CRT monitor Samsung SyncMaster ( up to 170 hz )
09/03/2018 00:50Ye we might as well post here our setups :D The version of this is more in depth anyway, so it's ok to start the new one I think
09/03/2018 00:51Originally posted by Nannoumouse: g400s + hardware unlocked scroll wheel.
dpi: 2400
sensetivity: 1
m_rawinput 1
launchoptions: -noforcemaccel -noforcemspd -noforcemparms -freq 100
resolution: 1024x768 @ Old CRT monitor Samsung SyncMaster ( up to 170 hz )
170hz on old crt?
09/03/2018 01:39Great attitude Hardbitter my friend! :)
Originally posted by HardbitterHey, there've been a lot of asking on best kz settings. And since today I randomly decided to note down my settings into txt, because lately i feel very comfortable and confident with my game running and i fear it could get lost or resetted due bad luck which sometimes happens. Anyway since I'm doing it for myself I thought that I would share it for those interested. I think this should enhance your efficiency. If you have 100hz monitor then for you it might be perfect setup. If you have lower than 100 then idk, but you could try it as well, just change values to your monitor refresh rate setup (60/75 or whatever). I don't claim to be super pro or that these settings are best you can get but as I said earlier, it's really the best setup as for me.
windows sensitivity - center
windows accel - off
720 dpi
mouse logitech g402
m_rawinput 1
raw mouse input (in cs mouse settings) - ON
m_filter 0
sensitivity 2.7 - 2.9
cs launch options: -noforcemaccel -noforcemspd -noforcemparms -freq 100
monitor hz set to 100 (must be exactly 100 if your monitor provides that value)
All it comes down to is to make the game run smooth, which you can get by using 100hz refresh rate.
Also you might want to make sure your windows accel is turned off. For that better install MarkC mousefix and run RInput (as a one time run to see if the game turned different). Creating new thread so this post doesn't get lost easily. Cheers.
700 dpi & 2.8 sens..so low, so slow :o
180 is still possible to jump, but as you bhop 360 do?;D
ShoCky how do u even make a quick neat circlestrafe with 720dpi+2.7ig Sen? What king-size mouse mat are you on?
09/03/2018 11:59(edited 09/03/2018 19:16)https://pp.userapi.com/c831309/v831309392/9bc32/Ly_-3kJeU2E.jpg it's about wrist positioning and prediction, kinda takes time to learn but at the end of the day it pays off with smoothness I think.
@surRendi ^_^
windows sens - 6 (center/default)
enhanced precision - off
m_rawinput 1
(noforce commands are irrelevant since m_rawinput exists)
800 dpi
2.75 sensitivity
-freq 120 , 140hz monitor locking to 120hz for 1.6 (-freq 140 is bugged)
1024x768 resolution (blackbars) stretched to fullscreen for faster horizontal mousespeed
mouse zowie fk1
Originally posted by HardbitterHey, there've been a lot of asking on best kz settings. And since today I randomly decided to note down my settings into txt, because lately i feel very comfortable and confident with my game running and i fear it could get lost or resetted due bad luck which sometimes happens. Anyway since I'm doing it for myself I thought that I would share it for those interested. I think this should enhance your efficiency. If you have 100hz monitor then for you it might be perfect setup. If you have lower than 100 then idk, but you could try it as well, just change values to your monitor refresh rate setup (60/75 or whatever). I don't claim to be super pro or that these settings are best you can get but as I said earlier, it's really the best setup as for me.
windows sensitivity - center
windows accel - off
720 dpi
mouse logitech g402
m_rawinput 1
raw mouse input (in cs mouse settings) - ON
m_filter 0
sensitivity 2.7 - 2.9
cs launch options: -noforcemaccel -noforcemspd -noforcemparms -freq 100
monitor hz set to 100 (must be exactly 100 if your monitor provides that value)
All it comes down to is to make the game run smooth, which you can get by using 100hz refresh rate.
Also you might want to make sure your windows accel is turned off. For that better install MarkC mousefix and run RInput (as a one time run to see if the game turned different). Creating new thread so this post doesn't get lost easily. Cheers.
You are using rinput with -noforce commands and m_rawinput 1? And does it work?
So i play on 144hz and when i switch to 100hz it feels alot smoother but it also adds screen tearing whenever i strafe...
My question is: How to play on 100hz without having screen tearing + having normal mouse movement?
The only way i found is to turn on vsync in graphics card settings , but then your mouse movement in game feels so weird , like it has some kind of a delay... + I tried to turn on triple buffering, it kinda lowered delay in mouse movement in game to what it should be, but still it's not the same as if i play on 144hz.
09/03/2018 19:15Originally posted by VoodooYou are using rinput with -noforce commands and m_rawinput 1? And does it work?
Tbh I don't even know for sure what works and what not. I do suspect that some settings might not work anymore and some may repeat or contradict with others but it sums up in a perfect setup so who cares xD
Originally posted by additionalSo i play on 144hz and when i switch to 100hz it feels alot smoother but it also adds screen tearing whenever i strafe...
My question is: How to play on 100hz without having screen tearing + having normal mouse movement?
The only way i found is to turn on vsync in graphics card settings , but then your mouse movement in game feels so weird , like it has some kind of a delay... + I tried to turn on triple buffering, it kinda lowered delay in mouse movement in game to what it should be, but still it's not the same as if i play on 144hz.
Screen tearing is a common thing when you play on 100hz setup. But I don't really see how it would bother your performance other than annoy your eye for a while. I personally don't get annoyed by it, moreover I simply unconsciously stopped noticing it. I'd also assume that screen tearing is a positive sign that your game runs smooth and correct, just let it be.
Btw forgot to poiunt out some more settings:
IG resolution 1280x960
black bars on
09/03/2018 20:42(edited 09/03/2018 20:44)I moved from sensitivity 30 to 2 and now i am at 2.6 as my center sens, but I am adjusting it based on the strafes - sometimes i need more, sometimes I have too much energy and I drop it a little bit.
I think nobody should stick to one sensitivity and definitely not to other player's one. If you want to play well anytime, you must adjust the sens for the best results. On the other hand, I have never changed my keyboard :D
09/03/2018 20:57Same shoot, I adjust my sens with difference range of 0.1-0.8 depending on my mood. It just has to feel right and that's all about it.
09/03/2018 23:25800 dpi 2.25 sens
Wow, i guess my sensitivity is kinda low.
windows sensitivity - center
windows accel - off
800 dpi
mouse logitech g402
m_rawinput 1
raw mouse input (in cs mouse settings) - ON
m_filter 0
sensitivity 1
cs launch options: -noforcemaccel -noforcemparms -freq 75
IG resolution 1440x900
black bars off
I think my question fits this thread.
Does your (the average Kreedzer) ingame graphics look like in this movie?
https://www.youtube.com/watch?v=UJmf6sOo-Fs
I always wonder, because my ingame isn't that fluid/smooth, it looks more like this (a little better)
https://www.youtube.com/watch?v=2Hy4nuCs300
I have 99 fps enabled, aswell as vertical sync. My macbook has a NVIDIA GeForce 9400M 256 MB graphics card, 15.4 inch LCD screen (1440 x 900) but I don't know if it's 75 or 100 Hz.
Does anybody know how I could improve the ingame graphics?
10/03/2018 18:07(edited 10/03/2018 18:10)windows sensitivity - 6
windows accel - off
750 dpi
mouse logitech g400s
m_rawinput 1
raw mouse input (in cs mouse settings) - ON
m_filter 1
cl_mousegrab 1
sensitivity 3.2
cs launch options: -nofbo
IG resolution 1280x1024 (120hz)
stretched all the time (bb for now)
Please log in to post replies.